歡迎瀏覽全新 BOSE.TW
 

Adjusting the display brightness

適用於:

The system's display automatically adjusts to the light conditions in the room. This feature improves visibility of the display. It brightens when there's lots of light, then dims so it's less intrusive when the room darkens. You can also fine-tune the brightness of the display, to compensate for a very bright window, for instance.

To adjust brightness levels for high and low light conditions, follow these steps:

on the remote, press and hold alarm time/menu until "setup menu" appears on the display

Alarm Setup/Menu

press tune/mp3 > five times until "bright hi" appears

Tune/MP3 >

press time - or time + button to set display brightness from 8 to 15 for high light conditions (factory setting is 12)

Time -

Time +

press tune/mp3 > once so "bright lo" appears

press time - or time + to set display brightness from 1 to 8 for low light conditions (factory setting is 4)

press the alarm setup/menu button to exit setup, or wait 10 seconds for setup to end automatically

這些資訊有幫助嗎?

太好了,感謝您的意見回饋。歡迎在下方分享其他評論。
很抱歉,此頁面未能符合您的期待。請讓我們瞭解您的期待及/或讓我們知悉如何能做得更好。
提交
感謝您提供的其他意見回應