歡迎瀏覽全新 BOSE.TW
 

CD changer doesn't work

If the top system works but your changer does not:

  • Check the connections between the top unit and the changer to make sure they are firmly connected. The power cord from the wall outlet should be connected to the changer. The short power cord from the changer passes power to the top unit
  • Unplug and check the 9-pin Bose® Link connector to ensure that there are no bent or missing pins. The changer will not operate if the 9-pin connector is damaged
  • Reset the system by unplug it from power for 60 seconds. When reconnected to power “-PLEASE WAIT-“ appears on the display. Wait until the message disappears, and then retest the system Note: If there are any discs in the system, the discs should eject after the reset. The discs will automatically reload if they are not removed within 10 seconds.

這些資訊有幫助嗎?

太好了,感謝您的意見回饋。歡迎在下方分享其他評論。
很抱歉,此頁面未能符合您的期待。請讓我們瞭解您的期待及/或讓我們知悉如何能做得更好。
提交
感謝您提供的其他意見回應