歡迎瀏覽全新 BOSE.TW
 

Setting SD Progressive Scan video

Progressive scan is a video format that displays all lines of the picture frame in a single pass, and refreshes the image 60 times a second. This format is not compatible with all video displays.

SD progressive scan is only available when the system uses a VS-2 video enhancer connected to the TV with component cables. If there is no VS-2 video enhancer connected to the system, see Activating Progressive Scan video. If a VS-2 video enhancer is connected with component cables, follow these steps:

Be sure the TV is on with the correct input selected

on the remote, press settings

press the down arrow until "sd progressive scan" is highlighted

press the right arrow to highlight the setting

press the up arrow or down arrow to select the appropriate setting:

Off: Sends interlaced video (480i or 576i) to the TV

On: Sends progressive video (480p or 576p) to the TV

press exit to save the setting and leave the menu

這些資訊有幫助嗎?

太好了,感謝您的意見回饋。歡迎在下方分享其他評論。
很抱歉,此頁面未能符合您的期待。請讓我們瞭解您的期待及/或讓我們知悉如何能做得更好。
提交
感謝您提供的其他意見回應