歡迎瀏覽全新 BOSE.TW
 

Setting the room code

Your Wave® music system comes from the factory ready to operate as a second-room device (room code B) when connected to a Bose® link-enabled Lifestyle® system. If you want to use your Wave® music system with your Lifestyle® system beyond a second room, you will need to change the room code to match that of the remote control you are using for that room.

Refer to your Lifestyle® system owner's guide for more information on room codes.

on the remote, press and hold alarm setup/menu until "setup menu" is displayed

Alarm Setup/Menu

press tune/mp3 > seven times until "room- b" is displayed. the dashes following the room letter indicate how the microswitches should be set on the lifestyle® system remote control

Tune/MP3 >

press time - or time + to select a room code other than room b

Time -

Time +

press alarm setup/menu to exit the setup menu or wait 10 seconds for the setup menu to end automatically

Alarm Setup/Menu

這些資訊有幫助嗎?

太好了,感謝您的意見回饋。歡迎在下方分享其他評論。
很抱歉,此頁面未能符合您的期待。請讓我們瞭解您的期待及/或讓我們知悉如何能做得更好。
提交
感謝您提供的其他意見回應