歡迎瀏覽全新 BOSE.TW
 

Using the radio

適用於:

Turning the radio on

on the remote, press fm/am to turn on the radio to the fm or am station last selected. press fm/am again to switch between fm and am.

When the radio is playing, radio station information is displayed below the clock time.

Tuning the radio

press fm/am to switch between fm and am.

Display while tuning

when you press fm/amseek/track or tune/mp3 to tune to a radio station, the frequency appears in the center of the display while you are tuning.

FM/AM

Seek/Track

Tune/MP3

note: five seconds after releasing fm/amtune/mp3 or seek/track, the clock time returns to the center of the display and the radio frequency appears below it.

Remote button functions for radio tuning:

  • seek/track back: press to find a lower frequency station with a strong signal.
  • seek/track forward: press to find a higher frequency station with a strong signal.
  • tune/mp3 <: press to manually tune to a lower frequency. or press and hold to move rapidly down through the frequency band.
  • tune/mp3 >: press to manually tune to a higher frequency. or press and hold to move rapidly up through the frequency band.

Note: If AM reception is weak, rotate your Wave® music system clockwise or counterclockwise to improve AM reception. If FM reception is weak, make sure the power cord is straightened as much as possible. To improve FM reception, you can install an external FM antenna.

這些資訊有幫助嗎?

太好了,感謝您的意見回饋。歡迎在下方分享其他評論。
很抱歉,此頁面未能符合您的期待。請讓我們瞭解您的期待及/或讓我們知悉如何能做得更好。
提交
感謝您提供的其他意見回應